PLCZ55-600-II Full-Auto Knife Paper Pleating Production Line

A set of PLCZ55-600-II full-auto knife paper pleating production line.

Slitting & Pleating Details

Representative PLCZ55-II series photos show the shared machine structure. Working width varies by model; refer to the specifications below for this model.

Slitting width adjustment

Slitting width adjustment

The cutting heads are positioned along the crossbeam during setup. A scale provides a visual reference when setting the slitting positions.

Pre-slitting station

Pre-slitting station

A row of cutting heads is arranged above the filter paper before the downstream marking and pleating stages.

Filter paper feed

Filter paper feed

The filter paper passes beneath the guide assembly into the pleating section.

Pleated filter paper output

Pleated filter paper output

A close-up of the folded filter paper at the discharge section shows the pleat profile.

Specification
55-600-II Pre-Slitting Conveyor
Product Name 55-600-II Pre-Slitter Conveyor
Speed 0.1–12 m/min (adjustable)
Min. Paper Width 32 mm
Max. Paper Width 600 mm
Motor Power 0.75 kW
Working Air Pressure 0.6 MPa
Power Supply 220 V / 50 Hz
M/C Weight 350 kg
M/C Size (L × W × H) 1200 × 1300 × 1100 mm
55-600-II Marker
Product Name 55-600-II Marker
Max. Marking Width 600 mm
Adjustable Marking Distance 8–55 mm
Power Supply 220 V / 50 Hz
Motor Power 1.1 kW
M/C Size (L × W × H) 1350 × 750 × 1100 mm
55-600-II Pleating Machine
Product Name 55-600-II Pleating Machine
Pleating Speed 0–110 pleats/min
Max. Paper Width 600 mm
Adjustable Pleating Height 8–55 mm
Power Supply 380 V / 50 Hz
Motor Power 1.1 kW
Heating Power 4 kW
Operating Temperature Up to 200 °C
Working Air Pressure 0.6 MPa
M/C Weight 650 kg
M/C Size (L × W × H) 1470 × 1720 × 1240 mm
Components
  • Auto paper de-coiler
  • Pre-slitting conveyor
  • Marker
  • Auto counter
  • Filter paper pleating machine (equipped with pre-heater and monitor)
Features
  • The pre-slitting machine can accurately and freely adjust the cutting dimensions through frequency converter speed regulation and cylinder blades in different filter sizes. it is simple operated but smooth and effective. After slitting the paper the conveyor for feeding the filter paper runs in synchronism with the marking machine by equipping the monitoring system.
  • The marking machine can mark in different pleat sizes, the marking distance can be set freely by the computer screen, and accurately marking distance will be appeared with the step motor loading.
  • The pleater uses upper and lower blades to alternately finish the folding, and then different pleating heights are acquired evenly and accurately by automatically adjusting the blades distance.
  • After marking, the filter paper will be pleated and pre-heated.
  • The machine is also suitable for folding the iron wire fabric and non-woven fabric of the hydraulic filter , even the multilayer folding.
Applications

The production line is applied to auto tri-filter industry, hydraulic pressure, purification and water treatment industries, etc.

Video
التنزيلات

لحماية خصوصية المستندات ، يرجى الاتصال بنا للحصول على كلمة مرور التنزيل: [email protected]