
The PLM-TB-2 is designed for two-side edge banding of pleated cabin air filters. These workshop photographs show the filter loading area, positioning tooling and a filter sample with side strips.
A pleated filter pack is placed on the orange tooling at the loading area.
The filter pack sits within the machine guides above the conveyor.
This sample shows the pleated filter media and the strips along two opposite edges.
A close-up view shows the relationship between the pleats and the edge strip.
| Product Ranges | Length: 150 – 400 mm Width: 150 – 300 mm Height: 10 – 60 mm |
| Scraping width | 10 – 60 mm |
| Voltage | 220 V |
| Air Pressure | 0.6 – 0.8 MPa |
| Power | 20 kW |
| Efficiency | 8 – 15 s/unit |
| Molds Quantity | 2 molds |
| Equipment dimension (L × W × H) | 2000 × 1900 × 1800 mm |
Para proteger la privacidad de los documentos, póngase en contacto con nosotros para obtener la contraseña de descarga: [email protected]