Four-side edge banding for cabin air filters: two edge-banding sections linked by a 90-degree filter rotation stage.

The PLM-TB-4 uses two two-side edge-banding sections to complete all four sides of a cabin air filter. Between the two sections, a gripping mechanism rotates the filter by 90 degrees.
Operators place pleated filter media into a mold, then load it onto the conveyor for edge banding.
The completed filter uses thicker, stiffer nonwoven strips to form its edges.
The metal pressing members press the edge-banding material into place.
The cutting units sever the nonwoven edge strips connecting adjacent filters.
The gripping mechanism rotates the filter by 90 degrees before it enters the second two-side edge-banding section.
This photograph shows the front section of the PLM-TB-4. The complete line extends beyond the photograph.
The pictured finished filter uses thicker, stiffer nonwoven edge strips, commonly used as rigid edges for cabin air filters.
For an application review, provide the filter length, width and height, pleated media sample, edge-strip specifications, mold information and required output. Operators prepare and load the pleated media in molds before the edge-banding process.
| Product Ranges | length: 150–400 mm width: 150–350 mm |
| Scraping width | 8 – 50 mm |
| Voltage | 220 V / 380 V |
| Air Pressure | 0.6 MPa |
| Power | 30 kW |
| Weight | 1200 kg |
| Action time of a single group of equipment | ≤ 7s |
| Equipment footprint size | (L × W × H): 19,000 × 3000 × 2000 mm |
| Number of equipment operators | mold feeding (manual filter element discharge) ≥ 1 |
| Number of circulating molds | ≥ 18 |
| The equipment replacement time should be 0.5 hours | |
| Loading, correction and welt mechanism are equipped with vacuum cleaner dust removal device. |


Para proteger la privacidad de los documentos, póngase en contacto con nosotros para obtener la contraseña de descarga: [email protected]