PU dispensing for automotive and industrial air filters, with dynamic mixing and a mold worktable that moves in two horizontal directions.

The dispensing head is positioned above a rectangular mold for filter production.
The mold worktable moves front to back and left to right.
The mold supports the product geometry during PU dispensing. The two-axis worktable moves the mold in the front-to-back and left-to-right directions beneath the dispensing head.
Share these details with PLM to review the mold and dispensing setup for your application.
| Product Name | PU-20F |
| Working Voltage | AC 380V / 50Hz |
| Working Air Pressure | 0.4–0.7 MPa |
| Dispensing Rate | 5–15 g/s |
| Pouring Range | 400 × 500 mm |
| Pouring Mode | Two-axis moving pouring |
| Cleaning Mode | Dichloromethane (methylene chloride / DCM) cleaning followed by compressed-air purging to remove residual cleaning solvent |
| Mixing Method | Dynamic mixing |
| Ratio Range | A:B = 100:20–100:40 |
| Equipment Power | 10 kW |
| Pouring Color | Single color (two components) |
| Drum Volume | 80 L |
| Appearance Size | Main machine 1600 × 1450 × 2200 mm; worktable 400 × 500 mm |
It is mainly used to pour PU for auto air filter and industry filter.
To protect the documents privacy, please contact us to get the download password: [email protected]