Rubber Pad Glue for Wide Ranges of Filters

Rubber pad glue is applicable to metal and rubber adhesive, especially suitable for filter rubber pad and the end cover of the adhesive.

The rubber pad glue is a quick-drying glue. After applying the glue to the rubber pad, press the end cap quickly, and then evenly apply pressure. It will stick firmly in 10 seconds, and use it after placing it for 24 hours.

LM1011

LM1012

Specification

Remark: The follow information is for reference only. Please consult our sales staff for specific selection.

Sealing Glue Model	LM1011	LM1012
Appearance	colorless transparent liquid	colorless transparent liquid
Cure Time	1 minute	10 seconds
Storage Period	12 months	6 months
Weight/Net Content	1000 g	750 mL
Viscosity	2–5 mPa·s	2–5 mPa·s
Tensile Shear Strength	≥10 MPa	≥10 MPa

Features

Excellent oil resistance
Excellent water resistance
Excellent anti-aging properties
Excellent high and low temperature resistance
Extreme shear strength
Film flexible
Strong early tack
The final bonding strength

Usage Method

The glue is evenly coated on the rubber pad for 10 seconds / 1 minutes. When the film is slightly dry, the adhesive begins to be bonded. After the sticky is good, it should be pressed evenly, and then used after 24 h.

Matters Needing Attention

Should be sealed and stored in a dry, ventilated and cool place.

Applications

Rubber pad glue is applicable to metal and rubber adhesive, especially suitable for filter rubber pad and the end cover of the adhesive.