Raw materials
Nonwoven media, white nonwoven hard-edge strips and hot-melt adhesive
CABIN AIR FILTER MANUFACTURING · NEW FACTORY & UPGRADE
Build or Upgrade Your Cabin Filter Linewith a Clear Production Process.
From white nonwoven media and activated-carbon cloth to pleating, two-side or four-side edge bonding and finished-filter installation—PLM helps you connect every production step.
FROM ONE MACHINETO ONE COMPLETE CABIN FILTER LINE
0136 years of filtration experience
02Machines + materials + tooling
03Installation + training + support
01 / FROM MATERIAL TO VEHICLE
One cabin filter. Six connected stages.
The right line begins with the finished filter you want to make—not with a disconnected machine list.
Knife pleating
Stable pleat height, pitch, counting and forming
Edge bonding
Two-side support or a complete four-side frame
Finished filters
White particle media or activated-carbon composite media
Vehicle installation
Fit, dimensions and airflow direction verified
Customer approval
Consistent products ready for your target market
02 / MATCH THE MACHINE TO THE PROCESS
Four PLM machines. Two production functions.
PL-AUTO55-700M handles knife folding. PLM-TB-2, PLM-TB-4 and PLM-TB-4S are edge-bonding solutions for different product structures and production goals.
PLEATING
PL-AUTO55-700M
Automatic Knife Folding Machine
自动刀片折纸机
EDGE BONDING
PLM-TB-2
Bilateral Edge Bonding Machine
双边贴边设备
EDGE BONDING
PLM-TB-4
Four-Side Edge Bonding Line
四边贴边生产线
EDGE BONDING
PLM-TB-4S
Four-Side Edge Bonding Machine
四边贴边机
03 / NEW FACTORY OR LINE UPGRADE
Start from where your project is today.
Build a practical starter line
Clarify the product, output and floor space first. PLM can match materials, machines, tooling, utilities and operator training in one coordinated plan.
- Define target filters and sizes
- Choose two-side or four-side structure
- Reserve space for future upgrades
Remove the current production bottleneck
Share your existing equipment, cycle time, labor, defects and target capacity. PLM can review where automation or process matching may create practical value.
- Map the current process and bottleneck
- Keep suitable existing equipment
- Plan phased automation and line connection
04 / BEYOND MACHINES
What PLM helps you connect
Process configuration
A step-by-step route matched to your finished cabin filter.
Machine selection
Equipment options aligned with size, output, labor and automation goals.
Material matching
Filter media, white hard-edge strips, adhesive and consumables reviewed together.
Tooling & samples
Product drawings, samples and changeover requirements checked before the final scope.
Layout guidance
Machine placement, material flow, utilities and future expansion considered.
Installation & training
Practical commissioning, operator guidance, spare parts and technical support.
CABIN FILTER MANUFACTURING SOLUTIONS
Cabin air filter production equipment for new factories and line upgrades.
PLM helps international manufacturers connect cabin filter pleating, two-side or four-side edge bonding, material matching, tooling, installation and operator training. The line can be planned around white nonwoven cabin filters, activated-carbon cabin filters, target sizes, daily output and available factory space.
Cabin filter pleating and folding
Use the PL-AUTO55-700M automatic knife folding machine to control pleat height, pitch and counting for cabin filter media.
Two-side and four-side edge bonding
Choose PLM-TB-2, PLM-TB-4 or PLM-TB-4S according to filter structure, SKU mix, labor plan and automation target.
Complete cabin filter factory setup
Match machines with nonwoven media, activated-carbon cloth, white hard-edge strips, hot-melt adhesive, tooling, layout and technical support.
cabin air filter production linecabin air filter making machinecar cabin filter manufacturing machineautomotive cabin air filter machinecabin filter pleating machinecabin filter edge bonding machinefour-side edge bonding machineactivated carbon cabin filter productioncabin filter factory setupcabin filter production equipment
FREE INITIAL PROJECT REVIEW
Tell us what you want to make—or what you want to improve.
You do not need to know the machine model. Share your filter, capacity and project stage. A PLM specialist can help clarify the next step.
- Review your filter and production goal
- Clarify missing technical information
- Recommend a practical process direction
PLM · Design, Supply & SupportMachines · Materials · Tooling · Process · Training
05 / COMMON QUESTIONS
Before you choose
Can PLM help if I am new to cabin-filter manufacturing?
Yes. Start with your target filter, dimensions, expected output, budget and factory space. PLM can explain the required process and suitable equipment direction.
What is the difference between two-side and four-side bonding?
Two-side bonding supports two opposite sides of the pleated pack. Four-side bonding creates a complete perimeter and requires corner, positioning and trimming control.
Can one line make both white and activated-carbon cabin filters?
Possibly, but media thickness, stiffness, powder release and bonding behavior must be checked with samples and trials before the configuration is confirmed.
Can I upgrade in phases?
Yes. A phased plan can retain suitable existing machines while reserving floor space, utilities and interfaces for later automation or capacity expansion.
What should I send for an accurate recommendation?
Send finished-filter photos or samples, dimensions, media and edge-strip type, target output, available workers, factory layout and current production problems.
